產品資訊 - capacitor aluminum coating case ->aluminum electrolytic capacitors

登入

加入會員

求助

Henna banto international trade co., ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

capacitor aluminum coating case

產品分類 :

電子電工->其他->電解電容器

產品規格

Model No:	BAN358

Country	CN
Brand	Banto
Materials	Aluminum Coating case for capacitor
Size	customization
Weight	customization
Color	transparent
Packing	PV bag , carton
Minimum Order	10000
Payment Term	T/T
Coating layer	PU
Temparature resistance	275 centigrade
Voltage Resistance	500 V

產品描述

Define: Aluminum Coating case of electrolytic
It is the upgrade of Old type aluminum electrolytic capacitor case, and we are so far the only one who can produce this kind of coating case in mainland China. Use clean-washed aluminum roll to coat on aluminum surface evenly with PU which can stand 265 centigrade high temperature for 3 minutes and 500V high voltage, through cutting, multi-step forming , then make out coating case for electrolytic capacitor, to replace the old non-coating aluminum case capacitor with PVC insulating sleeve .
Company standard of production
Structure size :
1.structure of aluminum coating case
2.The dimensions can be cusomized by clients
3.Coating aluminum case s explosion-proof construction shape and need it or not should be decided by clients
4.The thickness of coating: 0.01m 0.002mm
Material :
1.Use AL content above 98% pure industrial Aluminum roll
2 The chemistry content meet RoHS European environment protection command.
3.The tensile strength of raw aluminum :130-160MPA,ductility 5-12%
4.Coating material s formula and coating solvent conform to RoHS standard
5.Coating layer ductility above 2 times of draw ratio
6. Coating layer can stand high temperature of 265 centigrade for three minutes without color change and do not become yellow; and stand high voltage of 500 V no breakdown
Appearance :
1. The inside and outside of aluminum case should be clean and smooth, no remaining oil obvious, water mark or becoming black, allow to have one or two spot, the max spot should not beyond 2mm.
2. Coating layer is complete and no crack damage, smooth shinning surface, no mechanical damage mark,dent, burr or wrinkle.
3. Coating aluminum case cut surface should be smooth, no obvious burr, the vertical degree between cut surface and datum axis should conform to drawing requirements.
4. The bottom surface of aluminum case should be level , and dent area should not over 0.2mm.
Coating layer strength
Coating layer should have good extensibility and good wear resistance , the surface hardness reach 3H of pencils hardness.
Coating surface thermal endurance
Coating layer should meet the working temperature of SMD, and can stand high temperature of 265 centigrade for three minutes without color change and do not become yellow; and stand high voltage of 500 V no breakdown