產品資訊 - Optical Fiber Fusion Splicer QH-510/QH-530->handheld test series

登入

加入會員

求助

C.M.C Tech Co.,Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Optical Fiber Fusion Splicer QH-510/QH-530

產品分類 :

電信設備->其他->掌上型測試器

Optical Fiber Fusion Splicer QH-510/QH-530

產品規格

Model No:	QH-510

Country	0

產品描述

Fusion Splicer QH-510
Features:
1. Fiber core can be displayed clearly
2. Single X or Y view and X&Y view simultaneously
3. Auto check fiber cleaved angle
4. 9-second splice time and 30-second heat time
5. Small bulk and light weight
6. Inner light to set fiber at night
7. Simple operation manual

Specifications
Application---SM (Single-mode), MM (Multi-mode) silex-fiber 125um outer diameter (standard)SM cord 4-14um, MM cord 50,62.5um Fiber cleaved length: 16mm(standard)
Specifications---Average splicing loss: 0.01dB MM/0.02dB SM (standard measure)Typical splicing time:10s, typical heating time:60s, wave-return loss better than 60dB
Program---100units SM fusion program, 100units MMfusion program
Storage---5000 results
Heater---Optional outer heater, can heat 4 protecting sleeves at same time
Screen display---Display X-axis and Y-axis at the same time,display current time and date, display current work mode
Dimension---172mm(L) x180mm (W) x145mm (H) (Without battery module)
Work mode---Program/Splicing/Heating: Automation or manual optionally
Environment---Temperature: -1050 Storage:-4060Humidity: <95%RH (without dew) Work altitude: 0~4000 meters
Power Supply---Alternating Current: 100-220V 50/60Hz 30W Direct current:1014V 25W Examining Power supply real time(optional)Inner Li-ion battery charger and AC adaptor

Packing List:
1. Main Body Machine 1 set
2. P.S. Cord and adaptor 1 set
3. Fiber Cleaver 1 set
4. Electrodes 1 pair
5. Manual Disk 1pc
6. Cooling Tray 1pc
7. Carrying Case 1 pc
8. Total Weight 9.6kgs

Fusion Splicer QH-530
Features:
1. Core to core alignment by PAS technology (PAS: Profile Alignment System)
2. Digital fusion splicer with automatic focus function
3. Fiber core can be displayed clearly
4. Single X or Y view and X&Y view simultaneously
5. Auto check cleaved endface fault
6. display fiber cleaved and offset angle
7. 5.6 inch TFT color LCD monitor with clear digital image display
8. USB & VGA interface
9. Software upgrade via USB interface

Specifications:
Applicable fibers---SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber Count---Single
Cladding diameter---80 to150um
Coating diameter---100 to1000um
Fiber cleaved length---8to16mm with coating diameter of 250um or less. 16mm with coating diameter of 250 to 1000um. Optional Set-plate for 8 to 16mm with coating diameter of 250 to 1000um is available
Actual average splice loss---0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS Measured by cut-bak method relevant to ITU-T and IEC standards
Splicing time---Typical 9 sec
Return loss---> 60dB
Splicing mode ---53(templet), 40(user)
Splice loss estimate---Available
Storage of splice result---The last 4000 results to be stored in the internal memory
Fiber view and magnification---300X magnification for single X or Y view; 150X magnification for X and Y view simultaneously, display direction can be changed.
Viewing method and display---Two CMOS cameras and 5.6 inch color LCD monitor
Fiber core can be displayed clearly
Operating condition---0 to 5000m above sea level, 0 to 95%RH and -1050, respectively
Tension test---2N
Electrode life---2500
Tube heating mode---9(templet), 24(user)
Tube heating time---Typical 30 sec
Applicable protection sleeve length---60mm, 40mm and a series of micro sleeves
No.of splice/heating with battery---Typical 150 cycles (splice/tube heat) with inner Li-battery
Power supply---AC 100-240V with AC adapter; inner Li-battery(8000mAH)
Terminals---USB 1.1 connector for PC communication, VGA connector for outer display
Wind protection---Max. wind velocity of 15m/s
Dimensions---150mm(length) x150mm (width) x150mm (height)
Weight---2.7 Kg excluding battery, 3.2 Kg including battery

Packing List:
1. Main Body Machine 1 set
2. P.S. Cord and adaptor 1 set
3. Fiber Cleaver 1 set
4. Electrodes 1 pair
5. Manual Disk 1pc
6. Cooling Tray 1pc
7. Carrying Case 1 pc
8. Total Weight 9.6kgs